Lectrosonics HMa - Block 941
Processing...

Lectrosonics HMa - Block 941

Not Yet Rated | Write the First Review
$1,385.00 NEW

Qty

Product Description


Tunes across 3 brand new frequency ranges between 941.500 and 959.850 MHz:


941.525 - 951.975 MHz

952.875 - 956.225 MHz

956.475 - 959.825 MHz 

(intentionally "skips" over protected frequencies within this range to prevent accidental infringement on protected transmissions)


-Accepts microphone or line level signals
-Selectable 5, 15, 48 volt phantom power
-Selectable 50/100 mW output power
-Tunes across 3 ranges between 941.500 and 959.850 MHz
-Adjustable low frequency roll-off
-Powered by two AA batteries
-USB port for firmware updates
-IR (infrared) port for fast setup
-Solid machined aluminum housing
-Compatibility mode for use with Lectrosonics IFB receivers




Consumer Alert:

Most users do not need a license to operate this wireless microphone system. 
Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. 
Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. 
For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be licensed.

NOTE: This has not changed at all and has been in effect for over 20 years. 
If you qualify and wish to apply for a license go to: http://www.fcc.gov/Forms/Form601/601.html

Please note that this has no bearing on Part 74 users - Television and motion picture production, all licensed AM, FM, TV or broadcast stations, networks, and broadcast entities are not affected by this alert.  
They have always been eligible for Part 74 licensing (for decades now).  
We have included the information they will need for licensing should they decide to do so (thus allowing higher power levels).

Customer Ratings & Reviews

Be the first to rate this item!

Write Review