NEMESIS OSCA-DXVF DMX VIDEO FADER UNIT
Product Description
Building on the success of the proven Nemesis DMXVF video fader the new OSCA-DXVF adds OSC and other advanced features whilst still maintaining all the old favourites.
The OSCA-DXVF is a Dual Channel DMX and OSC Controlled Video Fader designed to allow users to restrict light emission levels from monitor screens - particularly those mounted in an auditorium - when darkness is required during a production.
The OSCA-DXVF maintains video sync signal during a blackout avoiding ugly 'Signal Lost' messages which would otherwise be shown on modern LCD screens.
The exact brightness can be faded directly via OSC or DMX from 0 to 100% in 1% increments, effectively treating the video screen brightness like a conventional lighting fixture.
The OSCA-DXVF can form part of an extensive OSC network allowing lighting, sound, stage management and other departments to all control screen brightness if required.
With the addition of a OSCA-R5 button box different presets or states can be controlled at the push of a button allowing, for example, a musical director to dim certain screens as-and-when they wish.
Under DMX control the OSCA-DXVF can directly interface with all modern lighting consoles.
Key Features:
VIdeo:
-
2 × Independent composite video channels
-
In-built 4-output Video Distribution Amplifier per channel
-
Fades input signal to black while retaining sync signal
Control:
-
DMX mode mode
-
OSC mode
-
DMX with OSC fallback mode (OSC automatically takes over if DMX stream not detected)
-
Manual mode
-
Entirely separate channels - control one with DMX and the other with OSC
-
Each channel controlled by the same or separate OSC or DMX messages
-
DMX invert: video mixer (where max DMX = max video) or video blackout (where max DMX = video blackout)
-
DMX thru
-
Remote set up and control over ethernet
General:
-
1U 19" rack mount
-
Front Panel LED display showing current status
-
75Ω Video BNC In/Outs, 5-pin XLR DMX Connections with link-thru, industrial Ethercon network connector
-
Fully compatible with all 3rd party OSC commands and Nemesis OSCA range
-
Config download, backup and restore
-
Internet enabled for updates and upgrades
-
DHCP served or fixed IP address
-
Industrial Ethercon network connector
-
Multicolour LEDs showing network, DMX, action and power status
