Rycote InVision Video - Shoe Foot

The InVision Video (Hot Shoe) can be mounted onto any camcorder hot shoe. It can be rotated 360 degrees around it's mounting point, on a 100 mm (4") bar. The bar is slotted which allows the cradle to be slid in and out to obtain perfect positioning. This can be used to move the microphone and windscreen back and out of shot in the lens. The shoe foot is machined from high grade brass. With a male 3/8" 16 Whitworth thread externally, and a 1/4" 20 female thread internally for complete functionality. �The InVision Video mounts use the patented �Lyre" technology first introduced by Rycote in 2007 in the S-series and provides excellent vibration isolation against handling 
& camera motor noise. �The Lyres are made from a specialist material, Hytrel, which allows the suspension to operate effectively in temperatures from minus 35˚C (-31˚F) to over 100˚C (212˚F). �The clip is designed to hold shotgun microphones from 19 to 25 mm in diameter and up to 300 mm in length, including the slab sided Sennheiser MKH range. �A �Soft feel" grip is moulded into the clip, to prevent the microphone twisting or slipping. �The Mount can be rotated 360 degrees around the mounting point & slid in and out allowing the microphone to be positioned in the optimum place on the camera. �A built in cable clamp which provides good isolation against cable borne noise �Lightweight and robust �InVision Video �" thumb wheel is fitted with female �" 20 thread allowing additional �" components to be used in conjunction with it. �The InVision Video mounts work perfectly with all Rycote slip-on windshields (windscreens), including the our foams, Softie & Miniscreen. Fitted with a Universal Lyre mic clip accepting diameters ranging 19-25mm. 360 degree swivel base on a 100mm bar with integrated brass Hot-Shoe adaptor. Rycote Lyres offer the ultimate microphone isolation against physical handling and vibrations caused by camera motors.