RS 420 L5Ug, 420 mm (17") Gooseneck/Tube for CCM_L with 5 m (16') cable to XLR-3M

special long (420 mm) gooseneck for use with any microphone of the CCM _L series output connector: XLR-3M These goosenecks have a miniature Lemo plug for CCM _L compact microphones at the upper end and a 3/8" internal thread at the bottom. With the RS version the upper part consists of a long rigid tube while the short lower part is flexible. The SRS version has a second short flexible part near the upper end of the tube, allowing the microphone's angle to be set.To isolate the microphone from solid-borne sound, due to the length of the gooseneck two AF 1 flanged mounting adapters with internal shock mount should be used, one above the other. These are held together by an ST 20-3/8 mounting cylinder of at least 61 mm length, with other lengths available on request; (see the illustration and explanation). This cylinder is to be ordered separately. It has a 3/8" threaded stud onto which the goosenecks can be screwed.